Technical data

112
W&T
3.18 SNMP incl. alarm sending per Trap
Send alarm messages as SNMP trap.
3.18.1 Basic Settings -> SNMP
Define here the basic settings needed for SNMP operation.
Community String: Read: Using this string you can have read
access to measurements in your SNMP manager.
Community String: Write: Using this string you can have both
read and write access to measurements in your SNMP manager.
If you want to fill a field without no information, please write
„public“ instead of „“.
Manager IP: Contains the IP address of your SNMP manager.
The device sends the SNMP messages to this address.