Datasheet

1 2 3 4 5
A
B
C
D
SIZE
A4
REV DATE FILE BY
A
B
C 21-SEP-11 NOTE GG
D 04-NOV-11 INSULATOR GG
E 19-JUL-13 INSULATOR QL
F 12-AUG-13 DWG QL
G
APPROVAL: RJ
UNIT: MM
SCALE:
PROJECTION: GENERAL TOLERANCE
.X =
+
/
-
0.2
.XX =
+
/
-
0.15
RoHS Compliant
PCB LAYOUT * - COMPONENT VIEW
WERI PART NO: 692 221 030 100
DESCRIPTION: USB 3.0 HORIZONTAL TYPE B
30-SEP-10 PDF JP
DRAW: JOE
SHEET: 1/1
TECHNICAL CHARACTERISTICS
MATERIAL
INSULATOR: LCP
FLAMABILITY RATING: UL94-V0
COLOR: BLUE
CONTACT MATERIAL: PHOSPHORE BRONZE
CONTACT TYPE: STAMPED
CONTACT PLATING: UNDERPLATE 1.27 to 2.54 µm Ni
CONTACT AREA 0.76 µm Gold
SOLDER TAIL AREA 2.54 to 5.08 µm Matt Tin
SHIELDING: BRASS Ni PLATED
ENVIRONMENTAL
OPERATING TEMPERATURE: -20 up to +85°C
COMPLIANCE: RoHS & LEAD FREE AS PER DIRECTIVE 2002/95/EC
HALOGEN FREE COMPLIANT AS PER IEC 61249-2-21
ELECTRICAL
CURRENT RATING:
- PIN 1 & PIN 4 (Vbus & corresponding ground PIN) 1.8A Max
- OTHER PINS 0.25 A Max
WORKING VOLTAGE: 30Vac
DIELECTRIC WITHSTANDING VOLTAGE: 100Vac/min
INSULATION RESISTANCE: > 100MΩ
CONTACT RESISTANCE:
- PIN 1 & PIN 4: 30mΩ Max
- OTHER PINS: 50mΩ Max
QUALITY CLASS: 5000 MATING CYCLES
STANDARD
CERTIFIED: E323964 / MODEL NUMBER 692221030100
MECHANICAL
INSERTION FORCE: 35.0N Max
EXTRACTION FORCE: 10.0N min
QUALITY CLASS: 5000 MATING CYCLES
SOLDERING
WAVE SOLDERING ONLY AS PER JEDEC J-STD-020D
PACKAGING
TRAY
CONNECTOR FRONT EDGE
SECTION A - A
10-MAY-11 UL GG
* NOTE: THE RECOMMENDED PCB LAYOUT IS FOR AN OPTIMIZED RETENTION FORCE OF CONNECTOR ON PCB BUT IT IMPLIES INSERTION FORCE THAT A LOT OF PICK AND PLACE MACHINES ARE NOT ABLE TO HANDLE. THEREFORE IT MIGHT BE NECESSARY TO
DRILL BIGGER HOLES FOR THE CLIPS. PLEASE CHECK THIS CARFULLY.