Data Sheet

Scale - 6:1
1 /1
2010-07-13
4311x10158x6
_________
Hsu
Released
WS-TSS
Tact Switch
with ground terminal
5x5 mm, SMD
WJ
6 : 1
SCALE
SIZE
DESCRIPTION
STATUS
PROJECTION
METHOD
PAGEDATE
ORDER CODE
TECHNICAL REFERENCE
CHECKEDCREATED
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
com. [phone] - 0
www.we-online.de
[e-mail]
GENERAL TOLERANCE
BUSINESS UNIT
REV.
FILE
DATE
BY
DIN ISO 2768-1m
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
eiCan
1.1 General Tolerance was +/- 0,2 11-08-26 WJ
1.2 Stroke Tolerance was +/- 0,15 11-08-30 WJ
1.3 Warning text 11-10-28 WJ
1.4 Bounce 10ms max. 14-04-11
DaF
1.5
Revised MatchCode
14-07-24
AL
1.6 Remove Contact cladding 14-11-04 DaF
GND
GND
1,0
4,6 5,5
4,8
7,2
GND
GND
2,6 4,8
6,2
3,7
0,55,0 ± 0,15
2,0 O 3,4 ± 0,2 q
0,5GND
2,5
0,05 ± 0,07
h 0,1 ref.
0,45
1,5
1,2
0,8
0,1 ± 0,01
1
2
3
4
1
2
3
4
1
2
3
4
GND
GND
Schematic
Land Pattern
PN
Force
Color of Stem
Life cycle
431 181 015 816 160g ± 50gf Black 1.000.000
431 151 015 826 260g ± 50gf White 200.000
SPECIFICATION
>Rating : 20mA, 15VDC
>Contact Resistance :
Initial : 100mΩ max.
After Life Test : 2Ω max.
>Insulation Resistance : min. 100MΩ at 500VDC
>Dielectric Strength : 250VAC for 1 minute
>Stroke : 0.25+0.05mm / -0.15mm
MATERIAL
>Cover : Copper alloy
>Stem : LCP UL 94 V-0
>Frame : LCP UL 94 V-0,color Black
>Contact : Stainless Steel with silver cladding
>Terminal : Copper alloy with silver plating
>Tape : Polyimide tape
SOLDERING INFORMATION
>Terminal in SMD version
>Reflow soldering according to JEDEC J-STD-020D
>Hand soldering under 350°C for 3 sec. max
ENVIRONMENTAL
Storage condition : -40°C ~ +85°C
Operation condition : -40°C ~ +85°C
Compliance : Lead Free , ROHS , Reach
PACKAGING INFORMATION
>Tape & Reel
5,0 ± 0,15