User's Manual

Hardware Installation

The Bluetooth USB Dongle is plug-and-play. After you have the software installed and

reboot your PC, you can plug the Bluetooth USB Dongle directly into your laptop’s or

desktop’s USB port. When you plug the USB Dongle to the USB port, the green power

LED on the USB Dongle should light up. See the diagram below. If the Bluetooth dongle

is searching other device or linking with other Bluetooth devices, the Link LED should

light up.

Please note that:

 In Windows 2000, ME and 98 operating systems, once the USB link is established,

a sequent “Found New Hardware Wizard” dialog box will be seen on the screen

displaying of the USB configuration information.

When the system has been configured with the USB device, the Found New

Hardware Wizard disappears.

 In Windows XP, when you plug the Bluetooth USB dongle into the USB port, the

system starts to configure the Bluetooth USB dongle. You can find the bubble

message shows on the lower-right corner of the Windows system tray. Please

follow the Found New Hardware Wizard to install the Bluetooth dongle driver.

Link Indicator

Power Indicator