Datasheet
Product Name PolyVent XS PolyVent Standard PolyVent Standard PolyVent High Airflow PolyVent XL PolyVent Stainless Steel PolyVent Ex+
Thread Size M6x0.75 M12x1 M12x1.5 M12x1.5 M32x1.5 M12x1.5 M12x1.5
Product Number PMF100600 PMF100318 (black) | PMF100319 (grey) PMF100320 (black) | PMF100321 (grey) PMF100585 (black) | PMF100586 (grey) PMF200542 PMF200444 PMF200400
Product Performance Characteristics
Typical airflow 300 ml/min (dp = 70 mbar) 450 ml/min (dp = 70 mbar) 450 ml/min (dp = 70 mbar) 4000 ml/min (dp = 70 mbar) 16 l/min (dp = 12 mbar) 1600 ml/min (dp = 70 mbar) 1600 ml/min (dp = 70 mbar)
Laminate: membrane | backing material ePTFE | – ePTFE | Polyester (PET) ePTFE | Polyester (PET) ePTFE | Polyester (PET) ePTFE | Polyester (PET) ePTFE | – ePTFE | –
Membrane characteristic Oleophobic Oleophobic Oleophobic Oleophobic Oleophobic Oleophobic Oleophobic
Vent body & cap: material Polyamide (PA6/66) Polyamide (PA6T/66) Polyamide (PA6T/66) Polyamide (PA6T/66) Polycarbonate (PC) Stainless steel (1.4404/316L) Stainless steel (1.4404/316L)
Vent body & cap: color similar to Black: RAL 9004 Black: RAL 9011 | Grey: RAL 7035 Black: RAL 9011 | Grey: RAL 7035 Black: RAL 9011 | Grey: RAL 7035 Grey: RAL 7035 Metallic Metallic
Wrench size 10 mm 16 mm 16 mm 16 mm 70 mm 18 mm 18 mm
O-Ring material Silicone 60 Shore A Silicone 60 Shore A Silicone 60 Shore A Silicone 60 Shore A Silicone 60 Shore A Silicone 60 Shore A Silicone 60 Shore A
Counter nut:
material | color | part number
Stainless steel (SUS304) | M10510-017 n / a Plastic | Grey | M10510-009
Plastic | Grey | M10510-009 Plastic | Grey | M10510-010
Stainless steel (1.4404/316L) | M10510-016
Nickel-plated brass | M10510-008
n / a
Traceability Yes: Individually laser-marked Yes: Individually laser-marked Yes: Individually laser-marked Yes: Individually laser-marked No Yes: Individually laser-marked Yes: Individually laser-marked
IECEx/ATEX Certification No No No No No No Yes
Vent Design and Dimensions
Units are in mm
Recommended Installation
Units are in mm
▪
Install on a flat, vertical housing
surface where water or other
contaminants will not pool.
▪
Install vent with cap on exterior of
housing.
Torque 0.3 ± 0.1 Nm 0.7 ± 0.1 Nm 0.7 ± 0.1 Nm
0.7 ± 0.1 Nm 5 Nm 0.9 ± 0.3 Nm (for IK10: 5.0 ± 0.5 Nm) 0.9 ± 0.3 Nm (required)
Through-hole diameter 6.2 ± 0.1 mm – 12.2 ± 0.1 mm 12.2 ± 0.1 mm 33 ± 0.5 mm 12.2 ± 0.1 mm –
GORE
Membrane O-Ring 10x2
10
Ø 17
M12x1.5 DIN13-21 6g
15.55
0.15
M32x1.5 DIN13-22 6g
22.7
13
+0.2
–
0.4
GORE
Membrane
O-Ring 55x3.2
Ø 75
GORE
Membrane
O-Ring 10x2
8.5
Ø 20
M12x1.5 DIN 13 6g
14.15 0.2
GORE
Membrane
O-Ring 10x2
8.5
Ø 20
M12x1.5 DIN 13 6g
14.15 0.2
Illu ist identisch mit
Querschnitt_PolyVent Standard_Recom.Install
Housing wall
Ø 14.3
0.2
Center axis of through-hole
M12x1.5
DIN13-21 6H
60°
2°
Housing wall
Ø 14.3
0.2
60°
2°
Center axis of through-hole
M12x1.5
DIN13-21 6H
max. 0.25° A
Housing wall
Center axis of
through-hole
M32x1.5
DIN13-22
6H
A
Housing
wall
Ø 14.3
0.2
Ra1.6
Center axis of through-hole
M12x1.5
DIN13-21 6H
60°
2°
IK10-Rated
Recommendation for storage
Gore recommend to store products in cool dry conditions (20–25 °C / 30–50% RH) and out of direct sun light,
preferably in the original packaging.