Datasheet

Product Name PolyVent XS PolyVent Standard PolyVent Standard PolyVent High Airflow PolyVent XL PolyVent Stainless Steel PolyVent Ex+
Thread Size M6x0.75 M12x1 M12x1.5 M12x1.5 M32x1.5 M12x1.5 M12x1.5
Product Number
PMF100600 PMF100318 (black) / PMF100319 (grey) PMF100320 (black) / PMF100321 (grey) PMF100585 (black) / PMF100586 (grey) PMF200542 PMF200444 PMF200400
Product Performance Characteristics
Typical airflow 300 ml / min (dp = 70 mbar) 450 ml / min (dp = 70 mbar) 450 ml / min (dp = 70 mbar) 4000 ml / min (dp = 70 mbar) 16 l / min (dp = 12 mbar) 1600 ml / min (dp = 70 mbar) 1600 ml / min (dp = 70 mbar)
Laminate: membrane /
backing material
ePTFE / – ePTFE / Polyester (PET) ePTFE / Polyester (PET) ePTFE / Polyester (PET) ePTFE / Polyester (PET) ePTFE / – ePTFE / –
Membrane characteristic Oleophobic Oleophobic Oleophobic Oleophobic Oleophobic Oleophobic Oleophobic
Vent body & cap: material Polyamide (PA6/66) Polyamide (PA6T/66) Polyamide (PA6T/66) Polyamide (PA6T/66) Polycarbonate (PC)
Stainless steel (1.4404 / 316L) Stainless steel (1.4404 / 316L)
Vent body & cap: color similar to Black: RAL 9004 Black: RAL 9011 / Grey: RAL 7035 Black: RAL 9011 / Grey: RAL 7035 Black: RAL 9011 / Grey: RAL 7035 Grey: RAL 7035 Metallic Metallic
Wrench size 10 mm 16 mm 16 mm 16 mm 70 mm 18 mm 18 mm
O-Ring material Silicone 60 Shore A Silicone 60 Shore A Silicone 60 Shore A Silicone 60 Shore A Silicone 60 Shore A Silicone 60 Shore A Silicone 60 Shore A
Counter nut: material /
color / part number
Stainless steel (SUS304) / M10510-017 n/a
Plastic / Grey / M10510-009 Plastic / Grey / M10510-009 Plastic / Grey / M10510-010
Stainless steel (1.4404
/ 316L) / M10510-016
Nickel-plated brass / M10510-008
n/a
Traceability
Yes: Individually laser-marked Yes: Individually laser-marked Yes: Individually laser-marked Yes: Individually laser-marked
No Yes: Individually laser-marked Yes: Individually laser-marked
IECEx/ATEX Certification
No No No No
No No Yes
Design and Dimensions
Units are in mm
Recommended Installation
Units are in mm
• Install on a flat, vertical housing
surface where water or other
contaminants will not pool.
• Install vent with cap on exterior
of housing.
Torque 0.3 ± 0.1 Nm 0.7 ± 0.1 Nm 0.7 ± 0.1 Nm 0.7 ± 0.1 Nm 5 Nm
0.9
± 0.3 Nm (for IK10: 5.0 ± 0.5 Nm) 0.9 ± 0.3 Nm (required)
Through-hole diameter
6.2
± 0.1 mm
–
12.2 ± 0.1 mm 12.2 ± 0.1 mm 33 ± 0.5 mm
12.2 ± 0.1 mm –
Product Information
GORE
TM
Membrane
O-Ring 10x2
10.55
5
O / 17
M12x1 DIN13-21 6g
0.15
GOR
E
TM
Membrane O-Ring 10x2
10
O / 17
M12x1.5 DIN13-21 6g
15.55
0.15
GOR
E
TM
Membrane O-Ring 10x2
10
O / 17
M12x1.5 DIN13-21 6g
15.55
0.15
Now IK10-Rated
Protective Vents
adhesive vents
screw-in series
M32x1.5 DIN13-22 6g
22.7
13
+0.2
–0.4
GORE
TM
Membrane O-Ring 55x3.2
O / 75
Illu ist identisch mit
Querschnitt_PolyVent Standard_Recom.Install
Housing wall
O / 14.3
0.2
Center axis of through-hole
M12x1.5
DIN13-21 6H
60°
2°
GORE
TM
Membrane
O-Ring 10 x 2
8.5
O / 20
M12x1.5 DIN 13 6g
14.15 0.2
Housing wall
O / 14.3
0.2
60°
2°
Center axis of through-hole
M12x1.5
DIN13-21 6H
Housing wall
M12x1
O / 14.3
0.2
Center axis of through-hole
60°
2°
DIN13-21 6H
Housing wall
M6x0.75
DIN13-21 6H
O / 8.8
0.2
45°
1°
Center axis
of through-hole
GORE
TM
MembraneO-Ring 4.8x1.4
O / 11.2
M6 x0.75 DIN13-21 6g
11.5
0.4
7
Illu ist identisch mit
Querschnitt_PolyVent Standard_Recom.Install
Housing wall
O / 14.3
0.2
60°
2°
Center axis of through-hole
M12x1.5
DIN13-21 6H
max. 0.25° A
Housing wall
Center axis of
through-hole
M32x1.5
DIN13-22 6H
A
GOR
E
TM
Membrane
O-Ring 10 x 2
8.5
O / 20
M12x1.5 DIN 13 6g
14.15 0.2
Housing
wall
O / 14.3
0.2
Ra1
.6
Center axis of through-hole
M12x1.5
DIN13-21 6H
60°
2°