User manual

3 User manual
GENERAL RECOMMENDATIONS – SAFETY
 The user is responsible for operating and servicing the sterilizer in accordance with the instructions
listed in this manual.
 The sterilizer has not been designed for the sterilisation of liquids.
 The sterilizer has not been designed to operate in the presence of gas or explosive vapours.
 The chamber is automatically heated to 110°C as soon as the sterilizer is switched on.
 The trays and the load will still be hot at the end of each cycle. Use the tray holder to remove each tray
from the chamber.
 Comply with the maximum weight specified, having been tested and validated for each load type (see §
4.6.1.) by W&H l STERILIZATION in order to ensure smooth operation and effective sterilization.
 Do not remove the instruction plate or any label from the sterilizer.
 Do not pour water or any other liquid over the sterilizer.
 Unplug the mains lead before inspecting or servicing the machine.
 Repairs and maintenance must only be carried out by an approved technician using only original spare
parts.
 In case of transport, drain both water tanks completely (§ 4.3 and 4.4), allow the sterilization chamber
to cool down and preferably use the original packaging.
Compliance with the instructions in this manual ensures safe operation.