User manual

User manual 32
7.6. CLEANING THE WATER TANKS
Completely drain both water tanks (main and used water tank).
 Open the service door.
 Insert the drain tube into the quick coupling drain connection of
the used water tank (right). Allow the entire contents of the tank
to empty and discard the used water.
 Disconnect the drainage hose by pressing the push-button on the
drain connection.
 Insert the drain tube into the quick coupling drain connection of
the main water tank (left). Allow the entire contents of the tank to
empty.
 Disconnect the drainage hose by pressing the push-button on the
drain connection.
 Fill both reservoirs each with:
2.8 litres of demineralised water + 0.2 litres of 90% alcohol (MB17)
3.7 litres of demineralised water + 0.3 litres of 90% alcohol (MB22)
 Allow the solution to sit for 30 minutes.
 Drain both tanks and discard the 3 litres on MB17 (4 litres on MB22) of solution.
 Fill the main tank with 3 litres on MB17 (4 litres on MB22) of distilled or
demineralised water.
 Run an empty cycle.
If the sterilizer is not used for more than 3 days, both water tanks must be
completely drained in order to avoid alga growth or any other deposits.
DO NOT RUN A CYCLE !
+