User manual

17 User manual
4.5.3. PROGRAMMING THE DATE AND TIME
It is essential to adjust the date and time especially if the sterilizer is connected to a printer. These parameters are
systematically printed at the beginning and at the end of the cycle report.
Place the selection cursors under the data that is to be adjusted. Increase or decrease its value, move the cursors
under the next value and repeat operation. Confirm the adjustment by pressing the "Ok" key.
4.5.4. PROGRAMMING THE PRINTER
Increase
Decrease
Control of selection
cursors
Confirmation, exit of
the sub-menu
Cursors
Cursor UP
Cursor DOWN
Confirmation
of the selection
To exit the
sub-menu