User manual

User manual
14
4.4. DRAINING OF THE USED WATER TANK
When the used water tank is full, it is impossible to run another cycle. The following message appears:
Open the service door.
Insert the drain tube into the quick coupling drain connection of
the used water tank (right) as shown in the diagram.
Allow the entire contents of the tank to empty and discard the
used water.
NEVER RE-USE THE USED WATER !
Disconnect the drain tube by pressing the push button on the drain
connection.
In the meantime, while the used water tank is drained,
the main tank can be re-filled.
If the sterilizer is not used for more than 3 days, both water tanks must be
completely drained in order to avoid alga growth or any other deposits.
D R A I N T H E
U S E D W A T E R T A N K