User manual

11 User manual
4. USE
4.1. MAIN MENU
Activate the mains switch, the selection screen appears.
If the sterilizer is not used for a certain period of time, it
will automatically go into stand-by mode.
Stand-by mode time is programmable (§ 4.5.6.).
Cycle selection
(§ 4.6.2.)
Access to sub
menus (§ 4.5.)
Manual
stand-by
When the sterilizer is switched ON, the chamber is automatically heated to 110°C.
Pre-heating starts from room temperature and takes approximately 10 minutes.
It is nevertheless possible to select and start a cycle before the end of pre-heating.