User manual

User manual 8
2.3. PRINTER CONNECTION (OPTIONAL)
 Connect the printer cable to the 25 pin parallel port socket at the back of the sterilizer.
Cable length should not exceed 2 metres.
 Plug in the printer mains cable.
 Switch ON the printer.
 Switch ON the sterilizer.
 Select the printer type (§ 4.5.4.).
All the information needed to document the sterilization cycles is printed:
- The name of the Doctor / surgery (§ 4.5.2.).
- The serial number of the sterilizer.
- The chronological number of the cycle.
- The date and time at the beginning and at the end of the cycle.
- The cycle selected.
- The duration, temperature and pressure of the various phases.
- Comments on cycle efficiency.
Attention !
We recommend to use the following printer:
- Custom DP40H.
It has been tested and is perfectly compatible with the sterilizer and its software.
The use of another printer is undertaken with the full responsability of the user, clearing the
manufacturer, W&H l STERILIZATION of responsability for warranty and any other claim.