Instruction manual

To operate the DSR-6100 remotely

1. Open a browser session, type the decoder’s unique IP address in the address bar, and

press the ENTER key.

For example, if the decoder is configured with IP address 10.11.23.60, then go to the

browser, type: http://10.11.23.60 in the address bar, and press ENTER.

2. When the login dialog box appears (as shown below), enter the User name and Password

and select OK. The default user name is ESPN, and the password is espn.

Note: Web browser login will not be available until commissioned by the uplink.

3. When the Home Page appears (as shown below), use the sidebar menu to access the

decoder’s various settings and control features.

http://10.11.23.60