Operating instructions

7 Trouble-shooting
52
… appears in the digital display
… the washing is not spinning or is not being spun properly
Possible cause Solution
• Selected programme is
intended for a reduced
washing load. If there are
too many articles, heating
and possibly also the
rinsing will be extended.
➤ With the next wash cycle adjust the amount
of articles to the max. washing load (see
P
ROGRAMME OVERVIEW).
Possible cause Solution
• The spin speed set is too
low.
➤ Increase the spin speed for the next wash
cycle.
• Too uneven a load in the
washing drum. The wash
items cannot be more
evenly distributed.
➤ Wash large and small items together to
reduce the possibility of very unbalanced
loads forming.
• Steam anti-crease was
selected and the
appliance was not
standing level.
➤ Optimize the appliance set-up according to
the installation instructions.