Specification and User Manual - 20210906

6 Installation
6.2 Hardware Installation
You have read and understood the warnings listed under "Precautions" on Chapter 2;
To achieve reliable distance measurements, please follow below tips:
 Better not using the camera in strong sunlight. If have to, keep the ambient light
below 50k Lux.
 Do NOT place any objects in the scene that are not part of your intended
target, especially mirrors or other shiny surfaces/objects.
 Maintain a stable housing temperature during operation.
 Take measures to provide cooling to camera
 Mount the camera robustly.
 All accessories are ready
The installation steps are as below:
1 Connect the camera module to PC USB interface through USB cable, as Figure
Figure 6.1 Hardware Installation
2 In Windows, when the camera module is successfully connected, it will pop up the
notice of the device driver installation. After the driver is auto-installed successfully,
it will display the VZense RGBD Camera device in Windows Device Manger.
Figure 6.2 VZense RGBD Camera