DCAM560C ToF Camera User Manual -20211210

26
A midspan (or POE injector) is used to add POE capability to regular non-POE
network links. Midspans can be used to upgrade existing LAN installations to POE,
and provide a versatile solution where fewer POE ports are required. Upgrading each
network connection to POE is as simple as patching it through the midspan, and as
with POE switches, power injection is controlled and automatic.
Midspans are available as multi-port rack-mounted units or low-cost single-port
injectors.
For Vzense DCAM560C camera, the POE Switch or POE injector needs to support
IEEE 802.3at-2009 standard also known as PoE+, which can provide up to 25.5W, or
IEEE 802.3bt-2018 standard also known as PoE++, which can provide up to 60W.
Otherwise the product may not work well at long range mode.
We can provide optional PoE switch or PoE injector to our customers, please try to
contact the sales for the quotation and more information.
Steps to Setup PoE Mode
As mentioned above, a PoE switch or PoE injector shall be in use to setup the PoE;
The steps are as below:
1. Mount the camera in an appropriate fixture, e.g. a camera bracket;
2. Plug one end of the Ethernet cable into the RK45 socket at the back of the camera,
and plug the RJ45 end into the Ethernet port of your PoE switch or PoE injector;
3. Connect the PoE switch or PoE injector to your host processor by Ethernet cable;