DCAM560C ToF Camera User Manual -20211210

4.2 DCAM560C Lite Interface

DCAM560C Lite is equipped with RJ45, LED, 6pin connector, IP reset button at the

back of its housing as shown in below figure.

For more information about pin assignments and connector types, see the following

sections.

Fig. 4.2: Camera Connectors

6pin Connector for DCAM560C Lite

The 6pin connector includes the one physical input signals and one physical output

signal, RS485 signal.

The pin assignments and pin numbering for the receptacle are as shown in below table.

The connector of the camera is a Molex receptacle, part number 535170630. The

recommended mating connector is a Molex plug, part number 511030600.

Line Color

Designation

RS485-A

RS485-B

Ext_Trigger

Exposure_timing

GND

Ext_OUT