DCAM550 ToF Camera User Manual 2022

5
2 Precautions
2.1 Safe Usage Instructions
DANGER
Electric Shock Risk
Non-standard and improper power supplies may result in fire and electric shock.
You must confirm the camera power supply used that meets the Safety Extra Low
Voltage(SELV) and Limited Power Supply (LPS) requirements.
CAUTION
Invisible Radiation
This camera uses laser to work, improper use may damage the eye. Lasers are classified
as risk group 1 (low risk) according to EN 60825 which means that the product presents
no risk related to exposure limits under normal usage conditions. Eye safety is only
guaranteed when the camera is used properly
2.2 Power
The DCAM550-U series products can work with either USB power or external DC
power.
With USB power, the working distance will be limited by the USB host power ability.
Normally the USB2.0 host can supply up to 5V/500mA current. USB3.0 host can supply
up to 5V/900mA current. We strongly suggest to use external DC power if you require
far distance which more than 4 meters. The DC power can accept 11V~26V power
source. For higher than 26V or lower than 11V, the device shall not work well or even
be damaged.
The DCAM550-P series products can work with either Power over Ethernet or external
DC power.
For PoE power source, the PSE device shall apply the PoE+ standard (802.3at) or
above, lower than that may cause the product doesn’t work well or even be damaged.
The DC power can accept 11V~26V power source. For higher than 26V or lower than
11V, the device shall not work well or even be damaged.
Vzense doesn’t produce PoE injector, but we can purchase it from 3
rd
party and ship