User's Manual

Vyyo Installation Guide
www.vyyo.com
Configuring a T1 Connection – p. 97
9. When this screen appears, select the desired port on the XMTS E1/T1
interface card using the drop-down menu and press the “Update” button.
This binds the T1 port on the modem to its corresponding T1 port on the
XMTS E1/T1 interface card (inserted into the rear of the XMTS chassis).
Other parameters may be changed fromt the defaults shown in this
screenshot to create a “fractional T1” connection.
Figure 6-20: Updating the Port Data
Select the port – all
assigned ports will
appear (only 1 in
this example)
Click the “Update” button
To make this a fractional T1
connection select the specific T1
slots you wish to use
Select the desired XMTS port
using the pull down menu