User's Manual

Vyyo Installation Guide
www.vyyo.com
Configuring a T1 Connection – p. 96
8. Now you must add the E1/T1 configuration for the modem by clicking
on the “Add” button.
NOTE: Do this process once for the V311 modems and
twice for the V312 modems (the latter have two E1/T1
ports).
NOTE: the modem does not need to be active on the
network to perform this procedure as this is strictly a
configuration procedure. However, the modem will not
appear under its IP address unless it is already on the
network as a data modem, i.e., the DOCSIS IP portion of
the initialization has been successful.
Figure 6-19: Adding a new E1/T1 configuration for a modem