User's Manual

Vyyo Installation Guide
www.vyyo.com
Configuring a T1 Connection – p. 91
6.2 Adding the T1 modem to the XMTS T1 Interface and
Assign Port(s)
NOTE: The XMTS Upstream and Downstream
parameters must be configured prior to performing this
procedure. In particular the Upstream “Voice Service
Type” must be set to “WAN” for an E1/T1 channel. See
Configuring a T1 Connection.
1. Open the Network Management System (NMS) tool and double-click
on the WMTS icon to bring up the the WMTS front panel.
Figure 6-11: NMS View of Network Devices
Double-click this icon