User's Manual

System Configuration Guide
www.vyyo.com
Configuring a T1 Connection – p. 84
2. Set the upstream channel ID using the same procedure. This is the
channel ID the modem will use to transmit upstream data to the XMTS.
The channel ID parameters are sent by the XMTS when it broadcasts
UCDs during the Obtaining Upstream Parameters phase (immediately
after the Downstream Synchronization phase) of the modem initialization
prcocess. This is the same procedure described in Setting the XMTS
Upstream Parameters and is repeated here for convenience.
Figure 6-2. Set the Upstream Channel ID