User's Manual

System Configuration Guide
www.vyyo.com
Adding a Modem to the XMTS – p. 58
2. Select the Configuration tool item from the Vyyo menu.
Figure 5-22: Selecting the Vyyo Configuration Tool from the WMTS Synoptic
Display
3.
4. Now select the Upstream Channel ID you wish to configure and right-
click the mouse. The Channel ID refers to the physical port on the
upstream RF card that you are configuring. (This connection is described
previously in section to be referenced.
In this example upstream channel 1 is selected and all of its parameters are
displayed in the right pane of the window.