User's Manual

www.vyyo.com
Adding a Modem to the XMTS – p. 34
Chapter 5. Adding a Modem to the
XMTS
NOTE: These instructions are required for all modems.
If you are adding a T1 modem then you must also
perform the step in Chapter 6, Configuring a T1
Connection to finish the installation.
Use the instructions in this chapter to setup a data modem or the data portion of
an E1/T1 modem and configure the XMTS to communicate with it over IP.
This chapter covers the following topics:
1. Editing the Modem Configuration File describes the steps necessary
to setup the modem configuration file.