User's Manual

Vyyo Installation Guide
www.vyyo.com
Synoptics Display for XMTS Configuration – p. 129
Figure 11-1: Network display of the XMTS
2. Now select the Upstream Channel ID you wish to configure and right-click
the mouse. This is a “Synoptics” display of the actual front panel of the
XMTS. Observe that there is only one (Hex) upstream card in this
example: There are six ports, each one having its own unique upstream
channel ID. In this example the channel IDs are the same as the port
number. However, if a second Hex card were installed its channel IDs
would be numbered from 9 to 14 and they would correspond to ports 1
through 6 on the second card – note that this allows for 8 channel IDs per
Hex card even though only 6 are actually used.
Double click this icon