User's Manual

Vyyo Installation Guide
www.vyyo.com
Setting the XMTS IP Address – p. 109
NOTE: If the IP address of the XMTS is working you may
connect using it instead of the serial port by choosing “IP”
instead of “Serial”. The system is shipped with the
default IP address of 10.10.10.2.
Although not necessary for this download procedure
since it uses the serial connection, you may enter a
temporary XMTS IP address, subnet mask and default
gateway IP address that is on the same subnet as the PC
being used to connect to the WMTS for the XMTS (these
can be the same as the permanent ones in the
RegTree.rtr file). This is useful if the XMTS has not yet
been downloaded with a permanent IP address and you
need (or prefer) to communicate with the XMTS via its
LAN connection.
Alternatively, if the XMTS IP address is already set then
you should verify that it is correct, but you do not need to
set it.
26. Enter the TFTP Server IP Address and make sure the filename
“regtree.rtr” appears in the “Version File” window. Then click the “Start
Software Download” button.
Figure 7-7. WMTS Configuration Progress
Setup these
three items
Very important
Do this last!