User's Manual

System Configuration Guide
www.vyyo.com
Adding a Modem to the WMTS – p. 54
6. Select the “General” tab in the popup window, scroll down to item “067”
and check (and select) the “Bootfile Name” checkbox to enter or change
the “boot” or modem configuration file name.
NOTE: Any of the other options may be changed using
this same procedure. These values must match the
physical setup of the network (as per the Network IP and
Network RF plans) to make the system work. If this
DHCP server is already in operation the default values
should be correct.
Figure 5-18: Enter the “boot” file name