User's Manual

System Configuration Guide
www.vyyo.com
Adding a Modem to the WMTS – p. 46
Figure 5-11. Defining and Naming Installed Modems
NOTE: This file (CM.SRC) must be compiled by
executing the command “dhcpgen cm” from the directory
in which the file is located. Before compilation, the DHCP
Server must be shut down. After compilation the
command “dhcpsvr” must be executed from the same
directory to read the compiled files and restart the
ipLease DHCP server.
6. If the ipLease DHCP server is running it must be shutdown in order to
reconfigure the IP addresses given in the CM.SRC file. Simply click on
the “SHUTDOWN” button in the upper right pane of the ipLease
application window.
Each modem name is defined in square brackets and
followed by its MAC address “Chaddr”, its
“StaticIPAddress” and it “bpBootFile” name (this is
also known as its modem configuration file.)