User's Manual

www.vyyo.com
Configuration Overview – p. 27
Vyyo Configuration Tool
WMTS MIB
database
This is a standalone JAVA
based tool that can be
accessed from the NMS. It is
used to modify and configure
the WMTS operating
parameters.
NMS (Castlerock)
WMTS or
Modem MIB
values
(Typically for
viewing only.)
A general purpose Network
Management System for
operating the network; also
used to launch the Vyyo
Configuration tool.
Any ASCII text editor, e.g.,
Notepad
CM.SRC
Used with ipLease (the DHCP
server) to bind a modem’s MAC
address to its network IP
address and its modem
configuration file (downloaded
during modem initialization) as
well as other network
parameters needed to
configure the modem.
DHCPGen
CM.SRC
Converts the file to a format
that ipLease can use
DHCP Server
modem
Sends the modem its network
IP address and the name of its
modem configuration file as
well as other information
needed to setup IP
connectivity.
TOD Server
modem
Used to set the time of day in
the modem and the WMTS
TFTP Server
modem and
WMTS
Used to send the modem
configuration or “boot” file to the
modem during initialization;
also used to load the WMTS
application and configuration
files
Telnet
Modem
Used to set the downstream
frequency that the modem will
scan to listen to the WMTS.
Also used to set the RF offset if
required.