User's Manual

www.vyyo.com
Configuration Overview – p. 26
2.6 Configuration Tools and Files Matrix
Tool
Configured
File or Device
Description
CMconfigurationFileEditor
Modem
Configuration
file (e.g.,
“MIC_xxx.cfg”,
where xxx is
some unique
number.)
This file downloads to a modem
during the registration process.
It contains all the parameters
required for the modem’s
operation in the DOCSIS
network: upstream and
downstream frequencies, QoS,
etc. It is also call the modem
“boot” file.
XmtsConfigurationFileEditor
(any standard ASCII text file
editor may also be used to
edit the text version of the
file)
Regtree.txt
Regtree.rtr
(downloadable
version of the
text file)
Regtree.txt contains the
permanent IP address of the
WMTS. This tool is a
convenient way to edit the more
common items in the file.
However, when editing the
WMTS IP address you must
use a standard text editor. The
Regtree file may be saved in
either text or downloadable
format using this tool.
SETIP.BAT
Regtree.txt
This batch file is used to
convert the text version of the
Regtree file to the
downloadable format
(Regtree.rtr). It calls
RTR2TXT.EXE and
RECFMT.EXE to do the
conversion.
RTR2TXT.EXE
Regtree.rtr
This tool is used to convert the
Regtree.rtr file to a standard
text file (Regtree.txt)
XmtsConfig
WMTS
Used to assign a temporary IP
address to the WMTS and to
download files to the WMTS.
Specifically it must be used to
download the compiled version
of the Regtree.txt file to the
WMTS. This is primarily used
during initial setup.