User's Manual

Appendix D. Launching the Vyyo
Configuration Tool
The Vyyo Configuration Tool is used to configure the WMTS and there are two ways to
launch the Vyyo Configuration Tool. You may use either one, depending on whether or
not the NMS (SNMPc) is up and running. If you just need to configure the WMTS it is
easier to launch the Vyyo Configuration Tool from the Windows “Start” menu. If you are
already working with the NMS you may launch the Vyyo Configuration Tool for a
particular WMTS on the network – there is a small advantage in doing this since you will
not have to add (“Insert”) the WMTS to the Vyyo Configuration Tool because the IP
address of the WMTS is passed directly to it upon invocation.