User's Manual

V
yy
ö V284 WMU User’s Guide
www.vyyo.com
1
2.2 Back Panel Ports
There are four ports and one button located at the back panel
of the V284 modem.
Figure 3 – V284 WMU rear Panel Ports
Port or Button Function
POWER Connect the 9 volt external power source to this port.
RESET Press this button to reset the modem to its default
settings.
Note: Use a straightened paper clip or a straight pin
to depress the Reset button.
LAN Connect an RJ-45 Ethernet cable to this port.
The other end of the cable can be connected to the
subscriber’s computer or an Ethernet hub or switch.
USB Use a USB A-B cable to connect this Universal
Serial Bus port to the customer’s computer. Use this
port when the customer’s computer is not equipped
with an Ethernet port.
Note: The USB port is not currently supported.
Cable Connect this F-type connector to the UHF antenna.
Table 2. V284 Rear Panel Ports