User's Manual

Page Center User Manual MNT-PC-VB
Page 6
To facilitate sending pages to a large number of different pagers, groups of pagers may be set up in the PAGE
CENTER. A group is first assigned a number, and the members of the group are programmed into the group
pager database. Once a group is set up, a page may be sent to all the members of the group simply by sending
the page to the given group.
2.2 Keypad
The built-in keypad is used to program the unit, and to manually enter pages. Its keys have the following
functions:
Key Primary Use Secondary Use
0 thru 9 Entering numbers Selecting a sub-menu
F1 Send a page after it is entered Select options from the
sub-menus
F2 Monitor the channel
F3 Talk to a two-way radio Monitor the channel if it
is busy
F4 Send a tone-only page to a numeric or
alphanumeric pager
DEL Correct an incorrect entry
- (Program) Used as a dash (-) when entering a
message.
Enters the programming
mode and exits menus
↓↑
Up/down arrows scroll through various
options on the display.
VOL+/- Adjust the local speaker volume
The PAGE CENTER has a keypad buffer that allows a user to type faster than the prompts on the display come
up. Keystrokes will not be lost, and efficient data entry is possible by operators skilled in the operation of the
PAGE CENTER.
2.3 External Keyboard
An external keyboard with a PS-2 connector may optionally be used if desired. When the external keyboard is
connected, the unit's built-in keypad continues to operate normally. The external keyboard's keys function the
same way as do the unit's keypad in most cases. Additional features are:
• The alphabetic keys may be used when entering pages to alphanumeric pagers.
• The ESC key is mapped to the keypad's "-" key.
• The ENTER key is mapped to the keypad's F1 key.
• The NUM LOCK key is enabled by default, permitting the operator to use the keyboard's numeric keypad
for more efficient entry of numeric data. Note that the keypad's "." key is mapped to the DEL key.
• Pressing CTRL and the Windows "MENU" key simultaneously enters the Setup Mode.
IMPORTANT NOTE: Some keyboards are extremely sensitive to the high RF fields present when an antenna
is connected directly to the rear of the PAGE CENTER . The keyboard may stop functioning properly after the
PAGE CENTER transmitter is turned on. If this situation occurs, it is recommended that the antenna be
mounted at least several feet from the PAGE CENTER.
2.4 Display
There is a two-line, twenty-character LCD display on the PAGE CENTER. The three LEDs on the top right side
of the unit indicate the state of the transmitter, whether the channel is busy, and the programming mode.