User's Manual

Page Center User Manual
Page 30
AUTODIAL,1,18005551212,[0D]
AUTODIAL,2,,[0D]
AUTODIAL,3,,[0D]
AUTODIAL,4,,[0D]
AUTODIAL,5,,[0D]
AUTODIAL,6,,[0D]
AUTODIAL,7,,[0D]
AUTODIAL,8,,[0D]
AUTODIAL,9,,[0D]
PAGER,0,ALPHA,9,POC1200,N,Y,0,0,[0D]
PAGER,1,NUMERIC,0,POC2400,Y,Y,0,0,[0D]
PAGER,2,NUMERIC,2,POC1200,N,Y,0,0,[0D]
PAGER,3,NUMERIC,100303,POC1200,N,Y,0,0,[0D]
PAGER,4,NUMERIC,4,POC1200,N,Y,0,0,[0D]
PAGER,5,NUMERIC,5,POC1200,N,Y,0,0,[0D]
PAGER,10,NUMERIC,10,POC2400,N,Y,0,0,[0D]
PAGER,11,NUMERIC,11,POC1200,N,Y,0,0,[0D]
PAGER,12,NUMERIC,12,POC512,N,Y,0,0,[0D]
PAGER,13,ALPHA,13,POC512,N,Y,0,0,[0D]
PAGER,14,ALPHA,14,POC1200,N,Y,0,0,[0D]
PAGER,17,NUMERIC,0,0,0,Y,Y,0,0,[0D]
PAGER,20,ALPHA,20100,POC512,N,Y,0,0,[0D]
PAGER,21,NUMERIC,21,POC1200,N,Y,0,0,[0D]
PAGER,22,NUMERIC,2200,POC1200,N,Y,0,0,[0D]
PAGER,100,TONE,99,POC1200,N,Y,0,0,[0D]
PAGER,101,NUMERIC,1010,POC512,N,Y,0,0,[0D]
PAGER,102,ALPHA,1020,POC512,N,Y,0,0,[0D]
PAGER,103,TONE,1030,POC1200,N,Y,0,0,[0D]
PAGER,104,NUMERIC,1040,POC1200,N,Y,0,0,[0D]
PAGER,105,ALPHA,1050,POC1200,N,Y,0,0,[0D]
PAGER,105,ALPHA,1050,POC1200,N,Y,0,0,[0D]
PAGER,106,TONE,1060,POC2400,N,Y,0,0,[0D]
PAGER,107,NUMERIC,1070,POC2400,N,Y,0,0,[0D]
PAGER,108,ALPHA,9,POC1200,N,Y,0,0,[0D]
PAGER,109,ALPHA,9,POC1200,N,Y,0,0,[0D]
PAGER,110,ALPHA,10,POC1200,N,Y,0,0,[0D]
PAGER,115,NUMERIC,0,,Y,Y,0,0,[0D]
PAGER,123,ALPHA,123,POC512,N,Y,0,0,[0D]
PAGER,125,ALERT,131195,TWO-TONE,N,Y,0,0,[0D]
PAGER,300,TONE,3000,GROUP-TONE,N,Y,0,0,[0D]
PAGER,301,TONE,30000,GROUP-TONE,N,Y,0,0,[0D]
PAGER,400,TONE,4000,GROUP-TONE,N,Y,0,0,[0D]
PAGER,500,TONE,5000,GROUP-TONE,N,Y,0,0,[0D]
PAGER,510,TONE,655380000,TWO-TONE,N,Y,20,20,[0D]
PAGER,556,ALPHA,0,,Y,Y,0,0,[0D]
PAGER,599,NUMERIC,599,POC1200,N,Y,0,0,[0D]
PAGER,998,NUMERIC,997,POC1200,N,Y,0,0,[0D]
PAGER,999,TONE,12345,POC2400,N,Y,0,0,[0D]
GROUP,1,1,23,,100,101,102,103,104,105,106,107,108,109,110,999,104,104,105,105,105,104,106,107,108,106,109[0D]
GROUP,5,556,3,,123,122,121[0D]
GROUP,15,115,5,,123,10,1,23,20[0D]
GROUP,16,17,3,,100,103,106[0D]
DONE[0D]
8.3 Restoring/Uploading the Retreived Database
If the database is stored on a disk in the format shown above, it may be re-loaded into the PageCenter. Use a
terminal emulation program to send the ASCII file into either serial port in a plain-text format. The serial port
must be configured for the TAP protocol.
The PageCenter will answer every line sent into it with an OK> if the line was acceptable, or ER> if there was
an error in it. If any errors occur during uploading, a message will be displayed at the end of the upload
sequence and the information received will not be saved. If this occurs, reduce the data rate of the port in use or
enable hardware flow control, then retry the upload operation.
Note that the “DB1[0D]” sequence in the first line tells the PageCenter that a database file is going to be sent
to it. The word “DONE” at the end of the file tells the PageCenter that the file has been sent. Once the word