User's Manual

OSMAC Base User Manual
Page 20
Manu.01_0405
2. Enter the number of the group you wish to work on and then press the F1 key. Valid group
numbers are 1 through 16. The display will then show:
GROUP X PAGER NN
assign pager number
Where X is the group number you wish to work on and NN is the pager number assigned to this
group. Important Note:
when you wish to page this group, you will enter the pager number NN
for it, not the group number.
3. Use the DEL key to backspace over NN if you wish to change the pager number this group is
referred to by. If the pager number NN is already assigned to an active pager, the will not allow
you to assign that number to the group and the pager number will be erased. If you wish to use
NN for a group number instead of an individual pager, you must first de-activate the pager. Section
3.1 describes how to deactivate a pager. Once the pager number for this group is set, press the F1
button. The following prompt will appear.
GROUP X = numeric
SELECT GROUP FUNC
4. Using the arrow keys, select the function (numeric, alpha or tone) for this pager group. Members
of the group may be of any type, but this selection will determine the prompt to the user when a
page to this group is initiated. Press F1 when your selection is made. The display will change to:
GROUP X MEMBER NN
ENTER MEMBER NUMBER
5. X will be the group number you are currently working on, and NN will be a number corresponding
to the member number you wish to edit. The first group member you enter will be member 1. The
second one you enter will be member 2 and so on. The display always first shows the next
member number you can enter a new member as. Use the UP/DOWN arrows if you wish to scroll
through the members, or press the DEL key to edit the member number and manually enter the
member number to edit. Press F1 key when you are ready to edit/add the selected group member.
The display will then show:
MEMBER NN =
ENTER PAGER NUMBER
6. Enter the number of the pager you wish to add to the group. For example if you wish to add pager
number 123 to the group, then enter 123 and then press the F1 key. Use the DEL key to
backspace over any entry if you wish to edit it. Note that:
To see the pagers in the database are members of this group, you can use the UP/DOWN
arrow key to scroll through the members of the group.
To delete a member, at the MEMBER NN = prompt, use the DEL key to erase its number from
the screen, and press the F1 key.
7. To finish entering pagers to this group, press the - key.