User Manual
Table Of Contents
- FOREWORD
- GENERAL OVERVIEW
- SPECIFICATIONS
- ELECTRICAL REQUIREMENTS
- SITE PLANNING
- INSTALLATION
- OPERATION
- POWERING UP THE SYSTEM
- CONNECTING A TERMINAL
- Bootloader
- *************************
- G2BT BOOTLOADER
- Version 2F49405
- *************************
- Current MAC address = 00:01:02:03:04:05
- Current IP address = 11.31.3.4
- Current subnet = 255.255.255.128
- Current gateway = 11.31.3.126
- Current TFTP Server = 10.0.0.1
- Current Download File = g2bt.pkg
- ***You've got 5 seconds to escape normal boot process by entering any key...
- Loading application...
- Application
- QUICK-START CONFIGURATION
- SUBSYSTEMS
- USER INTERFACES
- SW DOWNLOAD PROCESS
- POWER CONTROL
- COMMAND LINE USER INTERFACE
- ALARMS AND MANAGEMENT
- FACTORY DEFAULT VALUES
Sonik G2BT Base Transmitter User Manual
March 14, 2002 68 7M487C4
Alarm PwrCntrlFail COnsole Enable = YES
Alarm PwrCntrlFail COnsole Interval = 60
Alarm PwrCntrlFail TrapMsg Enable = YES
Alarm PwrCntrlFail TrapMsg Interval = 0
Alarm PwrCntrlFail Log Set = YES
Alarm PwrCntrlFail Log Clear = YES
Alarm Reset SEverity = MAJOR
Alarm Reset COnsole Enable = YES
Alarm Reset COnsole Interval = 60
Alarm Reset TrapMsg Enable = YES
Alarm Reset TrapMsg Interval = 0
Alarm Reset Log Set = YES
Alarm Reset Log Clear = YES
Alarm ResetPending SEverity = MAJOR
Alarm ResetPending COnsole Enable = YES
Alarm ResetPending COnsole Interval = 60
Alarm ResetPending TrapMsg Enable = YES
Alarm ResetPending TrapMsg Interval = 0
Alarm ResetPending Log Set = YES
Alarm ResetPending Log Clear = YES
Alarm StatsLogFull SEverity = MAJOR
Alarm StatsLogFull COnsole Enable = YES
Alarm StatsLogFull COnsole Interval = 60
Alarm StatsLogFull TrapMsg Enable = YES
Alarm StatsLogFull TrapMsg Interval = 0
Alarm StatsLogFull Log Set = YES
Alarm StatsLogFull Log Clear = YES
Alarm TempHigh SEverity = MAJOR
Alarm TempHigh COnsole Enable = YES
Alarm TempHigh COnsole Interval = 60
Alarm TempHigh TrapMsg Enable = YES
Alarm TempHigh TrapMsg Interval = 0
Alarm TempHigh Log Set = YES
Alarm TempHigh Log Clear = YES
Alarm TempLow SEverity = MAJOR
Alarm TempLow COnsole Enable = YES
Alarm TempLow COnsole Interval = 60
Alarm TempLow TrapMsg Enable = YES
Alarm TempLow TrapMsg Interval = 0
Alarm TempLow Log Set = YES
Alarm TempLow Log Clear = YES
Alarm MDPInTimeout SEverity = CRITICAL
Alarm MDPInTimeout COnsole Enable = YES
Alarm MDPInTimeout COnsole Interval = 60
Alarm MDPInTimeout TrapMsg Enable = YES
Alarm MDPInTimeout TrapMsg Interval = 0
Alarm MDPInTimeout Log Set = YES
Alarm MDPInTimeout Log Clear = YES
Alarm MDPPktsLost SEverity = MAJOR
Alarm MDPPktsLost COnsole Enable = YES
Alarm MDPPktsLost COnsole Interval = 60
Alarm MDPPktsLost TrapMsg Enable = YES
Alarm MDPPktsLost TrapMsg Interval = 0
Alarm MDPPktsLost Log Set = YES
Alarm MDPPktsLost Log Clear = YES
Alarm NoMDPSatRx SEverity = MINOR
Alarm NoMDPSatRx COnsole Enable = YES
Alarm NoMDPSatRx COnsole Interval = 60
Alarm NoMDPSatRx TrapMsg Enable = YES
Alarm NoMDPSatRx TrapMsg Interval = 0
Alarm NoMDPSatRx Log Set = YES
Alarm NoMDPSatRx Log Clear = YES
Alarm NoMDPLAN SEverity = MINOR