User Manual
Table Of Contents
- FOREWORD
- GENERAL OVERVIEW
- SPECIFICATIONS
- ELECTRICAL REQUIREMENTS
- SITE PLANNING
- INSTALLATION
- OPERATION
- POWERING UP THE SYSTEM
- CONNECTING A TERMINAL
- Bootloader
- *************************
- G2BT BOOTLOADER
- Version 2F49405
- *************************
- Current MAC address = 00:01:02:03:04:05
- Current IP address = 11.31.3.4
- Current subnet = 255.255.255.128
- Current gateway = 11.31.3.126
- Current TFTP Server = 10.0.0.1
- Current Download File = g2bt.pkg
- ***You've got 5 seconds to escape normal boot process by entering any key...
- Loading application...
- Application
- QUICK-START CONFIGURATION
- SUBSYSTEMS
- USER INTERFACES
- SW DOWNLOAD PROCESS
- POWER CONTROL
- COMMAND LINE USER INTERFACE
- ALARMS AND MANAGEMENT
- FACTORY DEFAULT VALUES
Sonik G2BT Base Transmitter User Manual
March 14, 2002 67 7M487C4
15 FACTORY DEFAULT VALUES
The following values are programmed into the unit, as the factory defaults.
Alarm All Enable = YES
Alarm CabinetIntrusion SEverity = MAJOR
Alarm CabinetIntrusion COnsole Enable = YES
Alarm CabinetIntrusion COnsole Interval = 60
Alarm CabinetIntrusion TrapMsg Enable = YES
Alarm CabinetIntrusion TrapMsg Interval = 0
Alarm CabinetIntrusion Log Set = YES
Alarm CabinetIntrusion Log Clear = YES
Alarm CEPwrFail Enable = NO
Alarm CEPwrFail SEverity = CRITICAL
Alarm CEPwrFail COnsole Enable = YES
Alarm CEPwrFail COnsole Interval = 60
Alarm CEPwrFail TrapMsg Enable = YES
Alarm CEPwrFail TrapMsg Interval = 0
Alarm CEPwrFail Log Set = YES
Alarm CEPwrFail Log Clear = YES
Alarm CEPwrProblem Enable = NO
Alarm CEPwrProblem SEverity = MAJOR
Alarm CEPwrProblem COnsole Enable = YES
Alarm CEPwrProblem COnsole Interval = 60
Alarm CEPwrProblem TrapMsg Enable = YES
Alarm CEPwrProblem TrapMsg Interval = 0
Alarm CEPwrProblem Log Set = YES
Alarm CEPwrProblem Log Clear = YES
Alarm CEOverCurrent Enable = NO
Alarm CEOverCurrent SEverity = MAJOR
Alarm CEOverCurrent COnsole Enable = YES
Alarm CEOverCurrent COnsole Interval = 60
Alarm CEOverCurrent TrapMsg Enable = YES
Alarm CEOverCurrent TrapMsg Interval = 0
Alarm CEOverCurrent Log Set = YES
Alarm CEOverCurrent Log Clear = YES
Alarm LostACPwr Enable = NO
Alarm LostACPwr SEverity = CRITICAL
Alarm LostACPwr COnsole Enable = YES
Alarm LostACPwr COnsole Interval = 60
Alarm LostACPwr TrapMsg Enable = YES
Alarm LostACPwr TrapMsg Interval = 0
Alarm LostACPwr Log Set = YES
Alarm LostACPwr Log Clear = YES
Alarm G2BTFail SEverity = CRITICAL
Alarm G2BTFail COnsole Enable = YES
Alarm G2BTFail COnsole Interval = 60
Alarm G2BTFail TrapMsg Enable = YES
Alarm G2BTFail TrapMsg Interval = 0
Alarm G2BTFail Log Set = YES
Alarm G2BTFail Log Clear = YES
Alarm ParmsNotSaved SEverity = INFO
Alarm ParmsNotSaved COnsole Enable = YES
Alarm ParmsNotSaved COnsole Interval = 60
Alarm ParmsNotSaved TrapMsg Enable = YES
Alarm ParmsNotSaved TrapMsg Interval = 0
Alarm ParmsNotSaved Log Set = YES
Alarm ParmsNotSaved Log Clear = YES
Alarm PwrCntrlFail SEverity = CRITICAL