User Manual
Table Of Contents
- FOREWORD
- GENERAL OVERVIEW
- SPECIFICATIONS
- ELECTRICAL REQUIREMENTS
- SITE PLANNING
- INSTALLATION
- OPERATION
- POWERING UP THE SYSTEM
- CONNECTING A TERMINAL
- Bootloader
- *************************
- G2BT BOOTLOADER
- Version 2F49405
- *************************
- Current MAC address = 00:01:02:03:04:05
- Current IP address = 11.31.3.4
- Current subnet = 255.255.255.128
- Current gateway = 11.31.3.126
- Current TFTP Server = 10.0.0.1
- Current Download File = g2bt.pkg
- ***You've got 5 seconds to escape normal boot process by entering any key...
- Loading application...
- Application
- QUICK-START CONFIGURATION
- SUBSYSTEMS
- USER INTERFACES
- SW DOWNLOAD PROCESS
- POWER CONTROL
- COMMAND LINE USER INTERFACE
- ALARMS AND MANAGEMENT
- FACTORY DEFAULT VALUES
Sonik G2BT Base Transmitter User Manual
March 14, 2002 54 7M487C4
13.2.18 SN
MP
…
The following are the commands relating to the SNMP settings.
Oper1
SNmp Getcommunity
Set or display the SNMP community name used to validate SNMP get request messages.
Changing this value does not take effect until the system is restarted.
Oper1
SNmp Setcommunity
Set or display the SNMP community name used to validate SNMP set request messages.
Changing this value does not take effect until the system is restarted.
Oper1
SNmp Trapcommunity
Set or display the SNMP community name encoded in SNMP trap messages the system
sends.
Oper1
SNmp Trap 1
[ a.b.c.d ]
Set or display an Internet IP address in Internet dot notation defining SNMP management
stations to be sent SNMP trap messages. SNMP trap messages can be generated by the
TCP/IP library for events such as system restart or network interface up or down, etc. or
can be generated by the alarm event functionality of the system. Setting an entry to
“0.0.0.0” disables that destination. Changes to this entry do not take effect until the
system is restarted.
Oper1
SNmp Trap 2
[ a.b.c.d ]
Set or display a second Internet IP address in Internet dot notation.
Oper1
SNmp Trap 3
[ a.b.c.d ]
Set or display a third Internet IP address in Internet dot notation.
Oper1
SNmp Trap 4
[ a.b.c.d ]
Set or display a fourth Internet IP address in Internet dot notation.
Oper1
SNmp Trap 5
[ a.b.c.d ]
Set or display a fifth Internet IP address in Internet dot notation.
13.2.19 ST
ATISTICS
…
The following are the commands relating to station statistics.
ST
atistics Grid
Status
Display the status of the previous and current frames. The return value will be
MISSING, RECEIVED
or
LAUNCHED
.
ST
atistics Grid Timedelta
Display the time delta between the frame received from the distribution port and the time
the frame is be must be launched, as well as the time delta between when the frame is
sent to the DSP for launching and the time the frame is be must be launched. Both time
delta values are in increments of 10ms ticks.
ST
atistics Cumframeloss
[ 0…127 ]