User Manual
Table Of Contents
- FOREWORD
- GENERAL OVERVIEW
- SPECIFICATIONS
- ELECTRICAL REQUIREMENTS
- SITE PLANNING
- INSTALLATION
- OPERATION
- POWERING UP THE SYSTEM
- CONNECTING A TERMINAL
- Bootloader
- *************************
- G2BT BOOTLOADER
- Version 2F49405
- *************************
- Current MAC address = 00:01:02:03:04:05
- Current IP address = 11.31.3.4
- Current subnet = 255.255.255.128
- Current gateway = 11.31.3.126
- Current TFTP Server = 10.0.0.1
- Current Download File = g2bt.pkg
- ***You've got 5 seconds to escape normal boot process by entering any key...
- Loading application...
- Application
- QUICK-START CONFIGURATION
- SUBSYSTEMS
- USER INTERFACES
- SW DOWNLOAD PROCESS
- POWER CONTROL
- COMMAND LINE USER INTERFACE
- ALARMS AND MANAGEMENT
- FACTORY DEFAULT VALUES
Sonik G2BT Base Transmitter User Manual
March 14, 2002 29 7M487C4
J10P3 GND To Backplane Backplane
9.1.1.6 J11 Aux +14 Vdc Interface (3 Pin Male Snap and Lock Connector)
PIN FUNCTION DIRECTION CONNECTS TO
J11P1 +14VDC From Backplane J1P16-23
J11P2 GND To Backplane Backplane
J11P3 GND To Backplane Backplane
9.1.1.7 J12 External Power Interface (10 Pin Male Snap and Lock
Connector)
PIN FUNCTION DIRECTION CONNECTS TO
J12P1 GND To Backplane Backplane
J12P2 GND To Backplane Backplane
J12P3 +5 Vdc From Backplane J1P24-31
J12P4 +5 Vdc From Backplane J1P24-31
J12P5 +14 Vdc From Backplane J1P16-23
J12P6 +14 Vdc From Backplane J1P16-23
J12P7 +28 Vdc From Backplane J1P4-15
J12P8 GND To Backplane Backplane
J12P9 +28 Vdc From Backplane J1P4-15
J12P10 GND To Backplane Backplane
9.1.1.8 J13 10 MHz Ref. (BNC FEMALE)
PIN FUNCTION DIRECTION CONNECTS TO
J13
OTR
CON
GND To Backplane Backplane
J13
Center
10 MHz Ref To Backpane J4P56
9.1.1.9 J14 GPS Sharing Interface ( 15 Pin Female D Sub Connector)
PIN FUNCTION DIRECTION CONNECTS TO