User Manual
Table Of Contents
- FOREWORD
- GENERAL OVERVIEW
- SPECIFICATIONS
- ELECTRICAL REQUIREMENTS
- SITE PLANNING
- INSTALLATION
- OPERATION
- POWERING UP THE SYSTEM
- CONNECTING A TERMINAL
- Bootloader
- *************************
- G2BT BOOTLOADER
- Version 2F49405
- *************************
- Current MAC address = 00:01:02:03:04:05
- Current IP address = 11.31.3.4
- Current subnet = 255.255.255.128
- Current gateway = 11.31.3.126
- Current TFTP Server = 10.0.0.1
- Current Download File = g2bt.pkg
- ***You've got 5 seconds to escape normal boot process by entering any key...
- Loading application...
- Application
- QUICK-START CONFIGURATION
- SUBSYSTEMS
- USER INTERFACES
- SW DOWNLOAD PROCESS
- POWER CONTROL
- COMMAND LINE USER INTERFACE
- ALARMS AND MANAGEMENT
- FACTORY DEFAULT VALUES
Sonik G2BT Base Transmitter User Manual
March 14, 2002 28 7M487C4
B
J16P11 MODEM_SCT
EB
From
Backplane
J3-P3, J25-P11 MODEM_SCTEB
J16P12 MODEM_TXC
B
To Backplane J4-P34, J25-P12 MODEM_TXCB
J16P13 MODEM_CTS
B
To Backplane J4-P70, J7-P27, J25-P13 MODEM_CTSB
J16P14 MODEM_TXD
B
From
Backplane
J3-P12, J7-P14, J25-P14 MODEM_TXDB
J16P15 MODEM_TXC
A
To Backplane J3-P60, J25-P15 MODEM_TXCA
J16P16 MODEM_RXD
B
To Backplane J3-P10, J7-P16, J25-P16 MODEM_RXDB
J16P17 MODEM_RXC
A
To Backplane J3-P18, J25-P17 MODEM_RXCA
J16P18 MODEM_LL To Backplane J3-P75, J7-P29, J25-P18 MODEM_LL
J16P19 MODEM_RTS
B
From
Backplane
J3-P14, J7-P25, J25-P19 MODEM_RTSB
J16P20 MODEM_DTR
A
From
Backplane
J3-P71, J7-P20, J25-P20 MODEM_DTRA
J16P21 MODEM_RL From
Backplane
J3-P6, J25-P21 MODEM_RL
J16P22 MODEM_RI To Backplane J3-P20, J25-P22 MODEM_RI
J16P23 MODEM_DTR
B
From
Backplane
J3-P16, J7-P30, J25-P23 MODEM_DTRB
J16P24 MODEM_SCT
EA
From
Backplane
J3-P64, J25-P24 MODEM_SCTEA
J16P25 MODEM_TM To Backplane J3-P8, J25-P25 MODEM_TM
9.1.1.4 J9 Backup Battery (4 Pin Male Snap and Lock Connector)
PIN FUNCTION DIRECTION CONNECTS TO
J9P1 +28VDC To Backplane J1P4-15
J9P2 GND To Backplane Backplane
J9P3 B+ To Backplane J1P54, J1P55
J9P4 B- To Backplane J1P56, J1P57
9.1.1.5 J10 Aux +5 Vdc (3 Pin Male Snap and Lock Connector)
PIN FUNCTION DIRECTION CONNECTS TO
J10P1 +5VDC From Backplane J1P24-31
J10P2 Not used