User Manual

Sonik G2BT Base Transmitter User Manual
March 14, 2002 21 7M487C4
*************************
G2BT BOOTLOADER
Version 2F49405
*************************
Current MAC address = 00:01:02:03:04:05
Current IP address = 11.31.3.4
Current subnet = 255.255.255.128
Current gateway = 11.31.3.126
Current TFTP Server = 10.0.0.1
Current Download File = g2bt.pkg
***You've got 5 seconds to escape normal boot process by entering any key...
Loading application...
The Power LED on the front panel will light oran
ge.
8.2.2 A
PPLICATION
Once the application has been loaded and execution has been passed to it, the following message
will appear on the front panel serial console:
**************************
G2BT SCM Application
Version 2F443C5
**************************
Downloading FPGA & DSP code...
Jam STAPL Byte-Code Player Version 2.1
Copyright (C) 1998-2000 Altera Corporation
Device #1 IDCODE is 110300DDconfiguring FLEX device(s)...DONEExit code = 0...
Success
Downloading FPGA & DSP code -- PASS
Restoring configuration
Current MAC address = 00:01:02:03:04:05
Current IP address = 11.31.3.4
Current subnet = 255.255.255.128
Current gateway = 11.31.3.126
Current TFTP Server = 10.0.1.30
Current Download File = g2btapp.pkg
The Power LED on the front panel will remain yellow until the system is able to transmit pages,
when the Power LED will become green. (Calibration may occur prior to this.)