User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
RF-Baton! Transmitter Controller Installation and Operation Installation
June 1999 6880497G01-B 4-21
Note: Keyboard conventions were previously described (see Chapter 1, "Introduction", paragraph,
"Keyboard Conventions".)
3. Enable the GPS initialization trace.
At the prompt, type:
a 192 GPSC 8 <Enter>
The system responds:
RA 192
The BCM outputs GPS initialization data for approximately 15 minutes. Here is an
example of the initialization data:
GPS STATE VERIFY_SOFTWARE_REVISION
GPS software version 8 revision 8
GPS STATE EXECUTE_SELF_TEST
GPS STATE SET_POS_FIX_TYPE
GPS STATE SET_FIX_MODE
GPS STATE SET_APPLICATION_TYPE
GPS STATE SET_LATITUDE
GPS STATE SET_LONGITUDE
GPS STATE SET_HEIGHT
GPS STATE SET_SATELLITE_MASK_ANGLE
GPS STATE SET_1PPS_CABLE_DELAY_OPTION
GPS STATE DISABLE_POSITION_HOLD_OPTION
GPS STATE WAIT_FOR_3D_LOCK*
GPS STATE WAIT_FOR_POSITION_CONVERGE*
GPS STATE SOLVE_FOR_LOCATION*
GPS STATE SET_FINAL_SATELLITE_MASK_ANGLE
GPS STATE SET_POSITION_HOLD_STGPS STATE
GPS STATE INIT_COMPLETE
Note: Lines marked with an asterisk (*) will occur many times.
4. Verify the front panel GPS lock LED lights shortly after the trace displays INIT
COMPLETE
.