User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
Foreword RF-Baton! Transmitter Controller Installation and Operation
vi 6880497G01-B June 1999
Important Safety Information
The installation, maintenance, and/or operation of this equipment may present potentially
unsafe conditions, including, but not limited to, electrical shock, improper voltage to
components, and improper operation that can cause personal injury, death or damage to
property.
Read Instructions: Read all the safety instructions before operating the equipment. Retain
these safety instructions for future reference. Specialized procedures and instructions are
required and must be followed. Also, all applicable safety procedures, such as Occupational,
Safety, and Health Administration (OSHA) requirements, National Electric Code
Requirements, local code requirements, safe working practices, and good judgement must be
used by personnel.
Heed Admonitions: Adhere to all warnings on the equipment and in the operating
instructions. Follow all operating and use instructions. Two safety admonitions are used in
this instruction manual to indicate:
• Equipment damage–
• Personal injury or injury that may result in death–
Mounting: Mount the equipment only as recommended by the manufacturer. Situate the
equipment away from heat sources such as radiators, heat registers, stoves, or other
equipment (including amplifiers) that produces heat.
CAUTION
This safety admonition applies to an operating or maintenance procedure, practice or
condition which, if not strictly observed, could result in damage to the equipment or
database.
DANGER
This safety admonition applies to an operating or maintenance
procedure, practice or condition which, if not strictly observed, could
result in serious personal injury or death.