User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
Installation RF-Baton! Transmitter Controller Installation and Operation
4-2 6880497G01-B June 1999
Required Tools and Equipment
The following tables list the tools and test equipment required for installation. The model
numbers listed are recommended, but equivalent tools and equipment made by other
manufacturers are acceptable. Motorola recommends using various shades of colored, vinyl
tape for wire identification.
Note: Select tools and equipment that have insulated grips and handles. This insulation helps
prevent potential injury resulting from electrical shock.
Recommended Tools
Table 4-1 lists the recommended tools for installation. These tools are not included as part of
the RF-Baton! (RF-B!) transmitter controller shipment and must be procured locally.
Table 4-1: Recommended Tools for Installation
Tool Model or Type Manufacturer Description
Torque Wrench Adjustable from
1 to 10 in.-lb
Locally procured Torque wrench handle for RF
connections
1-1/4 in. Crows Foot
Adapter
Snap-On, GFC40A
(or equivalant)
Snap-On Torque wrench adapter for Andrew type
7/16 DIN connectors
1-1/16 in. Crows Foot
Adapter
Snap-On, GFC34A
(or equivalent)
Snap-On Torque wrench adapter for
Huber-Suhner type 7/16 DIN connectors
TORX
Driver Set T-15 and T-30 bits Locally procured Tightening connections
Screwdriver Flatblade; 1/16 in. Locally procured Tightening connections
Wrench Open End, 3/8 in. Locally procured Tightening connections