User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
RF-Baton! Transmitter Controller Installation and Operation / Chapter 4
June 1999 6880497G01-B 4-1
Installation 4
Installation Overview
The following installation procedures must be performed only by certified technicians. If this
is your first time to install this type of equipment, completely read Chapter 3,
"Preinstallation", and this chapter before beginning the procedure. If you are not familiar with
site preparation, grounding techniques, and lightning protection. Motorola recommends the
Quality Standards Fixed Network Equipment Installation Manual (R56), Motorola Part No.
6881089E50.
Before performing the installation procedures, prepare the site with all associated antennas,
phone lines, and other related site equipment (see Chapter 3, "Preinstallation").