User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
RF-Baton! Transmitter Controller Installation and Operation Preinstallation
June 1999 6880497G01-B 3-7
Equipment Inspection
Generally, the factory packs all equipment, including the RF-B! transmitter controller with all
modules intact and mounted into a cabinet. Inspect all equipment while it is still on the
delivery truck.
Note: If obvious damage occurred to the shipping containers before unpacking, reject any damaged
materials and equipment. Report any damaged or short equipment issues to your shipping
company and Motorola representative.
Inspect the RF-B! transmitter controller, and other equipment, if applicable, for the following
conditions upon delivery:
• Loose or damaged equipment
• Dents, scratches, or other damage to the side of any chassis
• Cabinet wiring out of place
• Physical damage to external controls or connectors of modules and boards
• Acknowledgment of all equipment listed on the packing list
If any equipment is damaged, immediately contact the shipping company, then your Motorola
representative.
CAUTION
To prevent ESD damage, wear an antistatic wrist or foot strap, and observe the
guidelines for safe handling of electrostatic-sensitive devices and equipment.