User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
Preinstallation RF-Baton! Transmitter Controller Installation and Operation
3-2 6880497G01-B June 1999
Environmental Considerations
Extreme temperatures can cause permanent damage and reduce the life span of electronic
equipment. In addition, extreme temperature swings occurring over a short period of time can
significantly affect the paging station simulcast capabilities.
To combat temperature problems, Motorola recommends a thermostatically controlled
Heating, Ventilation, Air-Conditioning (HVAC) system. The HVAC system should be capable
of automatically switching between heating and cooling modes in response to the thermostat.
Wire each HVAC system to a delayed circuit to prevent both HVAC systems from starting
simultaneously. Choose controls that never allow both systems to operate simultaneously.
Maintain relative humidity within the site at less than 95 percent at +50 ˚C (+122 ˚F),
non-condensing. For equipment operating in an area that is not environmentally controlled,
the airborne particle level must not exceed 90 µg/m
3
.