User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
RF-Baton! Transmitter Controller Installation and Operation / Chapter 3
June 1999 6880497G01-B 3-1
Preinstallation 3
Site Considerations
Because the RF-B! transmitter controller is typically installed into an existing cabinet, ensure
that the site has been prepared appropriately. To verify that proper site considerations and
recommendations are being followed, refer to the Motorola Quality Standards - Fixed Network
Equipment (FNE) Installation Manual R56 (Motorola Part No. 6881089E50), your speciļ¬c
transmitter Installation and Operation manual, and local site documentation.