User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
System Description RF-Baton! Transmitter Controller Installation and Operation
2-16 6880497G01-B June 1999
RF-B! Transmitter Controller Front Panel
The RF-B! transmitter controller front panel contains a power switch, a reset switch, eight
light-emitting diodes (LEDs) (seven LEDs controlled by the RF-B! transmitter controller and
one LED controlled by the transmitter), and a serial port for communication. Figure 2-9 shows
the location of these controls.
Figure 2-9: RF-Baton! Transmitter Controller Controls and LEDs
Table 2-1 explains the controls and their functions. Table 2-2 lists the eight LEDs located on the
front panel, along with a description of the status indicated by each LED.
Table 2-1: RF-B! Transmitter Controller Controls
Control Function
POWER Switches power to the RF-B! transmitter controller
RESET Resets RF-B! transmitter controller operation
RESET
Control On
Control Fail
Disable
Alarm
Distribution OK
GPS Lock
RFB Req
TX OK
RF-Baton!™
Serial Port
705SRH-07
POWER