User Manual
Table Of Contents
- Foreword
- PSG Limited Equipment Warranty for U.S. And Canadian Markets
- PSG Limited Equipment Warranty for NonU.S. and Non-Canadian Markets
- Introduction 1
- System Description 2
- The Wireless Messaging System Overview
- FLEX, ReFLEX and InFLEXion Messaging Protocol Overview
- RF-B! Transmitter Controller Functional Description
- RF-Baton! Transmitter Controller Specifications
- Preinstallation 3
- Installation 4
- Operation 5
- Maintenance 6
- Troubleshooting
- Data Path Diagnostics
- GPS Diagnostics
- Removal and Installation
- Assigning an RF-B! Transmitter Controller to a Multicast Group
- Remote Software Download from Choreographer! Network Manager
- Local Software Download Using the Front Panel
- Parameter Database Updating
- Abbreviations and Acronyms A
- Connector Pinouts B
- FIPS Action Commands and Parameter IDs C
- Alarms and Error Messages D
- Traces E
System Description RF-Baton! Transmitter Controller Installation and Operation
2-4 6880497G01-B June 1999
Communicators
Communicators are miniature radios that accept messages from the paging station. ReFLEX
protocol communicators receive numeric or alphanumeric messages. InFLEXion
communicators receive voice messages. Both ReFLEX and InFLEXion communicators provide
return acknowledgments when the message is accurately received and when the subscriber
accesses the message. Depending upon the communicator, certain ReFLEX communicators,
and in the future InFLEXion, communicators are capable of initiating a return message.
Note: Communicators are also known by different names, depending on the particular region [for
example, Personal Messaging Units (PMUs), Personal Communications Devices (PCDs),
Pagers, or Subscriber Units].